This blog highlights the changes in 2024 with the updates from fiberdesk 7.17 to 7.23.
The following bugs have been corrected:
dispersion parameters have not been updated when loaded in the dispersion dialog
the field saved to memory did not show autocorrelation if selected
if multiple results needed to be shown on the parameter variation at the same time, it was not possible to copy it to the clipboard
2D parameter variation results are now correctly copied to clipboard
the measured parameters, like average power, were inconsistent with the rate equation result window
evaluation of numerical value got wrong, for instance, 1e-09 was evaluated to 1e-08: muparser updated
dispersion for PCF did not work
temporal FWHM did not give good results, if first and last datapoints of width evaluation were equal
BPM always started with flat phase
measurments on BPM now results in equal BPM_beam_diameter and Mode-Field-Diameter set to the NLSE as a parameter, as it should be. Just the units are different, MFD is in µm, beam diameter is in m.
if the propagation should be written into a file but no filename is given, no propagation was done. Now a fallback filename is taken.
Other changes are as follows:
Loss got a button to choose its unit in dB/m or 1/m.
From 7.18 on, parameter variation setups are saved, but previous ones can not be used anymore due to internal conflicts.
You can now reload an already opened project.
beta 4, PCF pitch and diameter are now a parameters, which can be varied.
gain dialog: gain saturation move to this dialog and elements activate on status settings
latest MKL & muparser libs used.
Intel (R) Core(TM) Ultra 5 125H 3.6 GHz
Comments